RC Toys

Features:

* Maximum Discharge Rate: 25C
* Discharge (Output) Leads: 14 AWG silicon wire, 105 mm long, with Deans connector
* Charging (Balancing) Lead: TP Style 4-pin connector. 22AWG PVC wire, 35 mm Long
* Perfect for 400 class helicopter
* Dimension: 105mm x 35mm x 23mm
* Weight: 6 oz / 169g
* Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.

Note: Please read instructions before using!

2 Packs 11.1V Tenergy 2200mAh 25C Li-Poly Battery Pack with Deans Connectors for 400 Class RC Helicopters

Price: $46.99

Hobbico Reef Racer II RTR EP Boat

This is the Hobbico Reef Racer 2 Deep-Vee ready-to-run electric powered boat kit.

The super-quick vee-hull Reef Racer 2 comes complete and ready to run, with a durable hull and prepainted hatch, with factory-applied decals there’s even a painted driver figure! The Reef Racer 2 offers quick response and “turn-on-a-dime” handling even at top speeds. Easily removable watertight covers that protect the electronics equipment and the Reef Racer 2′s self-righting hull design ensure non-stop action! With its amazing maneuverability, the Reef Racer 2 is perfect for swimming pools, small ponds and lakes!

Features an ABS molded pre-joined and pre-painted deep-vee type hull with detailed deck and driver figure, pre-applied decals, self-righting hull desing automatically recovers from rolls and flips. Water cooled 380 size motor. Forward only electronic speed control. The rubber sealed hatch secures with two twist-on latches.

Includes a water proof receiver box, 1×1.58 nylon propeller, 2-channel AM pistol grip radio with one mini servo, 6 cell 1100mAh NiMH battery pack, 30 minute 12V field battery charger,boat stand and illustrated instructions.

Color of hull is different depending on radio channel.

Requires 8 AA batteries not included

Price: $73.77

Incoming search terms:

• 550 motor RC

An absolute must for any airsoft AEG batteries, RC, or other electric products. Integrated technology avoids battery overheating and and significantly increases battery pack’s cycle life. Automatic cut-off when charger detects maximum voltage charge

Tenergy Universal Smart Charger for NiMH/NiCd Battery Packs (6V – 12V) Perfect for RC or Airsoft Battery Packs — NEW!

Price: $18.45

Features and Benefits

Product 8.4V 1600mAh NiMH Stick Battery
Make Made of 7 Tenergy 2/3A cells, AK-Stick Type
Connector Mini Tamiya connector assembled with 16 G wire
Fit Models Most Airsoft Mini AK series, upgraded and/or modified AEG’s
Feature Rapidly charge ande had a long life cycle span
Weight 6.3 Oz
Dimensions 20 mm (Diameter) and 202 mm (Length)
Recommended Charger Smart Universal Battery Pack Charger
Use attention Set charging current to 0.9A when charging with the above charger

8.4V Tenergy 1600mAh NiMH Stick Pack Mini Battery Pack for Airsoft Guns

Price: $14.11

Incoming search terms:

• motor power 550

Our Battery Eliminator Circuit is a little device that eliminates the need for a receiver and servo battery pack. It draws higher voltage from the motor batteries and drops it to a voltage level that is suitable for your receiver and servos. This is required in applications which draw high power for multiple servos or use more than 3S motor packs, as most ESCs with linear BECs are not designed for these applications.

Specifications:

Current Output: Peak: 10 amps
Continuous:
<12 volts input = 7 amps*
<24 volts input = 5 amps**Ratings are determined with a 5mph airflow on the BEC. Servo connectors are not rated for current in excess of 5 amps. Users are encouraged to replace the connectors if more than 5 amp currents are anticipated.

Output Voltage: Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately).

Input Voltage: 5v to 25.2v (2S to 6S LiPo)
Length: 1.2” (30mm)
Width: 0.6” (15mm)
Height: 0.4” (10mm)
Weight: 0.4 oz (11 grams)

Price: $18.44